Code of Maryland Regulations (Last Updated: April 6, 2021) |
Title 26. Department of Environment |
Part 2. |
Subtitle 08. WATER POLLUTION |
Chapter 26.08.05. Certification of State Water Quality Laboratories |
Sec. 26.08.05.06. Application for Certification
-
A. An application is required for:
(1) Certification for microbiology, chemistry, or radiochemistry; or
(2) Renewal of certification.
B. An application for water quality laboratory certification shall be submitted to the Department on a form provided by the Department, and shall include, but not be limited to, the following information:
(1) Name, address, and valid phone number of the water quality laboratory;
(2) Name of the water quality laboratory owner or director;
(3) A listing of the tests for which certification is requested;
(4) Description of facilities, equipment, and methodology;
(5) The name, education, experience, and training of the water quality laboratory supervisor;
(6) The name, education, experience, and training of all water quality laboratory analysts;
(7) The approximate number of tests by category performed annually by the water quality laboratory;
(8) The laboratorys Quality Assurance Manual;
(9) Valid Federal Employer Identification Number (FEIN) as required by Environment Article, §1-203, Annotated Code of Maryland;
(10) A copy of the valid and current water quality laboratory certification that has been issued by any other state or by NELAP, as applicable;
(11) Proficiency test results for each certified parameter and approved test method; and
(12) Fees, if applicable.
C. The laboratory owner, director, or quality assurance officer shall complete fully and sign the application.